Need help?


Search OutdoorKing by entering Key Words Below


Who's Online Now
0 registered members (), 4 guests, and 11 spiders.
Key: Admin, Global Mod, Mod
Site Links
Click Here For Parts List


Book Store


Newest Topics
Hello all, new SB45 owner from Vic
by Ryan M. 20/10/17 11:01 AM
whichxSpark plug for
by KenW. 20/10/17 12:15 AM
Briggs & Stratton Pulsa Jet diaphragms
by LRT. 19/10/17 06:51 PM
Scott Bonnar rebuild
by DavoBowden. 18/10/17 12:40 PM
Cleaning reel using electrolysis before painting
by tomkatoz. 18/10/17 10:24 AM
Topic Replies
Hello all, new SB45 owner from Vic
by beantin. 21/10/17 12:45 AM
***HEADS UP*** 14102017
by bigted. 21/10/17 12:39 AM
Ride-on manuals
by Bruce. 20/10/17 08:52 PM
Scott Bonnar 65
by CyberJack. 20/10/17 02:04 PM
Cleaning reel using electrolysis before painting
by CyberJack. 20/10/17 02:01 PM
Previous Thread
Next Thread
Print Thread
Rate This Thread
Hop To
#6593 - 27/11/07 07:59 PM Victa 2 stroke mower & carb ID help please  
nz635  Offline
Novice
Joined: Feb 2007
Posts: 8
Christchurch, New Zealand
Hi all,
I have a victa 2 stroke lawnmower for which i am trying to identify year & model, I am also trying to establish if the carb is the correct carb for the model, and if the cc is 125 or 160.

The mower has a label attached stating it's model as MCA 281A. Engine # is EN 72916Z, also it has the numbers 98 stamped above the letters EN.

The carb is the black plastic type but I can't establish from the pictures I have available if the carb is the LM type or if it is a G4, although it is definitely one of the two types- or maybe even a mix of both types, I do have however some ( i assume) part numbers taken off individual carb parts as follows:

part # item
CRO 3604A carb body
CRO 3501A float chamber cap (white)

The poppet valve in the carb body is white ( is this the correct coloured valve for this body, or should it be a black one? the float chamber cap is of the type that has no indexing tangs on the inner edge of the cap.Any help with this would be appreciated

thanks Bryce


Membership information

#6595 - 27/11/07 10:54 PM Re: Victa 2 stroke mower & carb ID help please [Re: nz635]  
Bruce  Offline
Repair Junkie
Joined: Dec 1999
Posts: 5,144
Sydney, NSW, Australia
Bryce,

The year that it was made was between 1996 & 1997 and it is a power Torque engine which is 160cc.

The carby is a LM type and the standard setting 'C' on the valve.

All information is in the parts list and manuals area of this forum. cheers2


Regards,


Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.

#6597 - 29/11/07 04:59 PM Re: Victa 2 stroke mower & carb ID help please [Re: Bruce]  
nz635  Offline
Novice
Joined: Feb 2007
Posts: 8
Christchurch, New Zealand
Thanks for the info re the LM victa carb Bruce. One other question for you- is the ignition cut-out switch (that is mounted in the carb body) avialble as a separte item? If not what sort of cost would I be looking at for a new LM carb?

Thanks Bryce


#6599 - 30/11/07 07:12 AM Re: Victa 2 stroke mower & carb ID help please [Re: nz635]  
victa man  Offline
Victa Mower Specialist
Joined: Dec 2002
Posts: 126
Australia
nz635,

Yes the wires can be bought as a separate item and would cost around $5.00. cheers2


Regards,

Victa Man

#6601 - 01/12/07 01:29 PM Re: Victa 2 stroke mower & carb ID help please [Re: victa man]  
nz635  Offline
Novice
Joined: Feb 2007
Posts: 8
Christchurch, New Zealand
Thankyou for the info Victa Man


#8529 - 08/06/08 10:22 PM Re: Victa 2 stroke mower & carb ID help please [Re: nz635]  
voodoo  Offline
Novice
Joined: May 2008
Posts: 9
Qld , Australia
hey sorry to hijak post but id like to know what model i have, only numbers i can find are cro 3636a on the carby

st12644a on starter setup and

en72515a on heatsink

any help


#8534 - 08/06/08 11:23 PM Re: Victa 2 stroke mower & carb ID help please [Re: voodoo]  
Bruce  Offline
Repair Junkie
Joined: Dec 1999
Posts: 5,144
Sydney, NSW, Australia
voodo,

The numbers are not much help as the carby is a G4 type and the en number is a cylinder that is no longer available. The starter part does not come up at all.

Can you start a new topic and post a picture of the machine. cheers2


Regards,


Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.


Moderated by  bigted, Bruce, CyberJack, Deejay, Gadge 

Today's Birthdays
raceyblue (78)
October
S M T W T F S
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31
Newest Members
Daymon k., PeterTheGreatWA, belgrade park, jezzadownunder, Arbo
10652 Registered Users
Forum Statistics
Forums141
Topics9,794
Posts74,106
Members10,652
Most Online1,013
Jan 13th, 2014
Latest Photos
Victa Fairlight 400
Lawn Patrol
Scott Bonnar 14" rebuild
Supercut 20" - Villiers Engine
Another Model 45 rebuild
HOME |CONTACT US
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.021s Queries: 15 (0.004s) Memory: 2.8931 MB (Peak: 3.0656 MB) Zlib enabled. Server Time: 2017-10-20 19:52:55 UTC